6.1.11.5.1. The carburetor with the automatic air gate
You watch the corresponding description in subsection 3.1.3.1.6.
- 1. Maintenance instruction
- 2. Weekly checks and service in way
- 3. Maintenance
- 4. Engine
- 5. Cooling system, heating and ventilation
- 6. Fuel and exhaust systems
- 6.1. Models with the carburetor
- 6.1.1. Technical characteristic
- 6.1.2. Use of unleaded gasoline
- 6.1.3. Removal and installation of the case of the air filter
- 6.1.4. System of adjustment of temperature of the air coming to the engine
- 6.1.5. Check, removal and installation of the fuel pump
- 6.1.6. Removal and installation of the fuel level sensor
- 6.1.7. Removal and installation of the fuel tank
- 6.1.8. Removal, installation and adjustment of a cable of an accelerator
- 6.1.9. Removal and installation of a pedal of an accelerator
- 6.1.10. Removal, installation and adjustment of a cable of control of the air gate
- 6.1.11. Carburetors
- 6.1.11.1. Adjustments on the carburetor 32 TL
- 6.1.11.2. Adjustments on the carburetor 35 PDSI
- 6.1.11.3. Adjustments on the carburetor 1B1
- 6.1.11.4. Adjustments on the carburetor 2E3
- 6.1.11.5. Adjustments on the Varajei II carburetor
- 6.1.11.5.1. The carburetor with the automatic air gate
- 6.1.11.5.1.1. Turns of idling and quality of fuel mix
- 6.1.11.5.1.2. The accelerated idling turns
- 6.1.11.5.1.3. Movement gate (gap And)
- 6.1.11.5.1.4. The accelerated idling (a gap In)
- 6.1.11.5.1.5. Provision of completely open butterfly valve
- 6.1.11.5.1.6. Cover of the automatic air gate
- 6.1.11.5.1.7. Accelerating pump
- 6.1.11.5.1.8. Shock-absorber of a butterfly valve
- 6.1.11.5.1.9. Partial loading
- 6.1.11.5.2. Hand-operated carburetor air gate
- 6.1.11.5.1. The carburetor with the automatic air gate
- 6.1.12. Check of the electromagnetic valve of interruption in supply of fuel
- 6.1.13. Removal and installation of the carburetor
- 6.1.14. Repair of the carburetor
- 6.1.15. Removal and installation of an inlet collector
- 6.1.16. Removal and installation of a final collector
- 6.1.17. Removal and installation of a heater of an inlet collector
- 6.1.18. Removal and installation of the exhaust system
- 6.2. Models with system of injection of fuel
- 6.3. Models with engines 16D and 16DA
- 6.4. Models with engines 17D and 17DR
- 6.1. Models with the carburetor
- 7. System of start and charging
- 8. System of ignition
- 9. Coupling
- 10. Transmissions and power shafts
- 11. Brake system
- 12. Suspension bracket and steering
- 13. Body
- 14. Electric circuits
