85425ea0




6.1.17. Removal and installation of a heater of an inlet collector

The electric heater of an inlet collector is established on models with the engine 16 SH with the automatic transmission.

Removal

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Disconnect the electric socket from a heater.
3. Unscrew bolts of fastening of a heater to an inlet collector, then move a heater down and remove it.

Installation

PERFORMANCE ORDER
Installation is made in the sequence, the return to removal. Check that the interfaced surfaces of a heater and an inlet collector were pure, and use a new sealing ring.