6.1.6. Removal and installation of the fuel level sensor


1. Remove a weight wire from the accumulator and a cover of a fuel-filling mouth.
2. Through a fuel-filling mouth pump out fuel from the fuel tank.
3. Lift a back part of the car and fix on supports.
4. Disconnect the electric socket from the fuel level sensor.
5. Using a marker or paint, put combination tags on the sensor and the fuel tank in order that the sensor could be installed in initial situation. Insert a steel core into grooves of a cover of the sensor and turn a cover counterclockwise. If the cover of the sensor is fixed by bolts, unscrew them.
6. Being careful, take the fuel level sensor from the fuel tank, at the same time do not bend the float lever.
7. Remove a sealing ring.


Installation is made in the sequence, the return to removal, but at the same time it is necessary to use a new sealing ring.