6.1.15. Removal and installation of an inlet collector


Models of 1,2 l
1. The collector can be removed both with the carburetor, and without carburetor. Disconnect a vacuum hose of the vacuum amplifier of brakes from a collector.
2. Unscrew three bolts (are specified by shooters) fastenings of a collector to a head of the block of cylinders and remove a collector and laying.
L models 1,3, 1,4 and 1,6
3. Merge cooling liquid from the cooling system.
4. Remove the generator.
5. Disconnect a cooling system pipe from an inlet collector and a case of coupling.
6. On models of 1,3 l disconnect the electric socket of the index of temperature of cooling liquid.
7. Remove the carburetor.
8. Disconnect a vacuum hose of the vacuum amplifier of brakes.
9. Unscrew nuts and remove an inlet collector and laying of an inlet collector.


Installation is made in the sequence, the return to removal. At the same time it is necessary to use new laying. Tighten nuts and bolts of fastening of a collector the required moment. On models 1,3, 1,4 and 1,6 of l fill in cooling liquid in the cooling system. Adjust a tension of an auxiliary driving belt of the generator.