6.1.13. Removal and installation of the carburetor


1. Remove a weight wire from the accumulator.
2. Remove the air filter.
3. On hand-operated models of the air gate disconnect a cable of control of the air gate from the carburetor. On models with the automatic air gate disconnect electric sockets and / or pipes of supply of cooling liquid. For reduction of losses of cooling liquid close the ends of pipes suitable traffic jams.
4. Disconnect a hose of supply of fuel from a separator of steam or the carburetor. In the presence disconnect a hose of return of fuel from the carburetor. Close the ends of hoses suitable traffic jams.
5. Disconnect an accelerator cable.
6. Disconnect a vacuum hose of the distributor of ignition from the carburetor.
7. Disconnect the electric socket from the electromagnetic valve blocking fuel supply.
8. Disconnect the remained hoses or wires, then unscrew nuts and remove the carburetor from hairpins. Remove laying of the carburetor.


1. Installation is made in the sequence, the return to removal, taking into account the next moments.
2. With defects use new laying of the carburetor.
3. Adjust a cable of an accelerator and a cable of control of the air gate.
4. If hoses of cooling liquid were removed, check and, if necessary, bring the level of cooling liquid to norm.
5. Adjust turns of idling and maintenance WITH in exhaust gases.