85425ea0

6.1.10. Removal, installation and adjustment of a cable of control of the air gate

Removal

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Take a pin of fastening of a cable of control of the air gate to the handle and disconnect a cable from the handle. Unscrew and remove the handle of control of the air gate.
3. Unscrew a lock ring or a nut which fix the handle of control of the air gate to the dashboard. Move the handle in the panel and disconnect the electric socket of a control lamp.
4. Remove the air filter.
5. Disconnect a cover and a cable of control of the air gate from the carburetor. On some models the cable of control of the air gate fastens a bolt (it is specified by an arrow), which needs previously to be weakened.
6. Take a sealing ring of a cable from a partition of a motor compartment and take a cable.

Installation

PERFORMANCE ORDER
Installation is made in the sequence, the return to removal. If necessary adjust a cable of control of the air gate.

Adjustment

PERFORMANCE ORDER
Adjustment of a cable can be made, moving either fastening of a cover of a cable, or a cable. If the handle of management of a cable is moved against the stop, there has to be an insignificant sagging of a cable from the carburetor. Extend the handle of management against the stop and check that the air gate completely opens.