85425ea0




6.1.8. Removal, installation and adjustment of a cable of an accelerator

Removal

PERFORMANCE ORDER
1. Remove the air filter.
2. Remove a spring bracket and disconnect the spherical hinge of a cable of an accelerator from the lever of a butterfly valve of the carburetor.
3. Remove a bracket, the fixing accelerator cable cover to an arm on the carburetor, then remove a sealing ring from an arm.
4. In interior of the car remove an accelerator cable from a pedal for what move a spring back and, using the lever, take an accelerator cable from the end of a groove.
5. Take a sealing ring of a cable of an accelerator from a partition of a motor compartment. Take an accelerator cable in a motor compartment of the car.

Installation

Installation is made in the sequence, the return to removal.

Adjustment

PERFORMANCE ORDER
1. Check that at completely pressed accelerator pedal the butterfly valve completely opens. Adjustment of a cable of an accelerator is made by shift of the bracket fixing an accelerator cable cover to a carburetor arm. The bracket fixing an accelerator cable cover in an arm on the carburetor is intended for adjustment of sagging of a cable of an accelerator.
2. On models of 1,3 l with the engine 13 NB check that at completely drowned handle of control of the air gate there is a small gap (it is specified by an arrow) between the screw of adjustment of the accelerated turns of idling and a gate cam plate.