13.24.14.1. Replacement of the making elements
TEMPERATURE SENSOR
| PERFORMANCE ORDER |
| 1. Disconnect a sensor wire in the multicontact socket about a left headlight. |
| 2. Take temperature sensor from a nest in a front bumper and remove it. |
| 3. Installation is made in the sequence, the return to removal. |
|
DISTANCE SENSOR
The sensor of distance is located in the speedometer drive on the transmission.
| PERFORMANCE ORDER |
| 1. Disconnect the multicontact socket of the sensor, then remove the sensor from the transmission. |
| 2. In the presence unscrew a speedometer drive cable from the sensor and remove the sensor. |
| 3. Installation is made in the sequence, the return to removal. |
|
FUEL FLOWMETER
The flowmeter of fuel is located on a wheel arch.
| PERFORMANCE ORDER |
| 1. Remove a weight wire from the accumulator. |
| 2. Disconnect the multicontact electric socket from a fuel flowmeter. |
| 3. Mark and disconnect fuel hoses from a flowmeter of fuel and close their ends suitable traffic jams. |
| 4. Unscrew a bolt and remove a fuel flowmeter. |
| 5. Installation is made in the sequence, the return to removal. |
|
ON-BOARD COMPUTER
| PERFORMANCE ORDER |
| 1. Remove a weight wire from the accumulator. |
| 2. Remove the radio receiver. |
| 3. Take the on-board computer from a nest and disconnect from it the electric socket. |
| 4. Installation is made in the sequence, the return to removal. |
| 5. At installation of the new on-board computer it needs to be calibrated on the car at service station. |
|
ILLUMINATION OF THE DISPLAY OF THE COMPUTER
| PERFORMANCE ORDER |
| 1. Remove the on-board computer. |
| 2. Using flat-nose pliers, turn a cartridge with a bulb and take it from a back part of the on-board computer. |
| 3. Installation is made in the sequence, the return to removal. |
|
