85425ea0




13:12. Replacement of components of the lock of a trunk lid

TRUNK LID LOCK

PERFORMANCE ORDER
1. Draw a line on lock perimeter on a trunk lid.
2. Unscrew screws and remove the trunk lid lock.
3. Installation is made in the sequence, the return to removal.
4. Put the lock according to the line put before removal.
5. Check operation of the lock, opening and closing a luggage carrier several times.
6. If necessary adjust position of the lock or a latch.

TRUNK LID LOCK LATCH

PERFORMANCE ORDER
1. Remove protective finishing from a trunk lid ledge.
2. Unscrew a bolt (1), disconnect plugs (2) latches (3) and remove it.
3. Installation is made in the sequence, the return to removal.
4. For adjustment weaken a bolt and, moving a latch, establish it on the required height.

TRUNK LID HANDLE

PERFORMANCE ORDER
1. Open a trunk lid and unscrew two nuts fixing the trunk lid handle which are available from the inside.
2. Installation is made in the sequence, the return to removal.