85425ea0




13.24.19. Removal and installation of the engine of a screen wiper and draft

Removal

PERFORMANCE ORDER
1. Remove screen wiper levers.
2. Remove a weight wire from the accumulator.
3. Unscrew four screws and remove two half of the fairing located in the windshield basis.
4. Unscrew nuts (the nut is specified by an arrow), the fixing axes of levers of a screen wiper.
5. Unscrew the screw, remove the deflector of water and remove rubber consolidation from the top part of a partition of a motor compartment.
6. Release a clamp (it is specified by an arrow) and disconnect the electric multicontact socket from the screen wiper engine.
7. Unscrew the screw (it is specified by an arrow) and remove the engine together with draft.
8. If necessary unscrew a nut (it is specified by an arrow) and remove draft from the screen wiper engine.
9. Unscrew three screws and remove the screen wiper engine from an arm.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal.
2. Keep in mind that on an arm for fastening of the engine of a screen wiper there are two groups of openings (are specified by shooters) for cars with right-hand and left-hand traffic.