13:16. Replacement of an external rear-view mirror
MIRROR GLASS
On all models glass of a mirror can be replaced separately.
| PERFORMANCE ORDER |
|
1. Using a wooden wedge, remove old glass of a mirror and disconnect from it electric wires. |
|
2. Connect thirst to new glass of a mirror and latch mirror glass on the place (junctions are specified by shooters). Be careful not to break mirror glass. |
|
THE MIRROR ELECTRIC MOTOR WITH HEATING
| PERFORMANCE ORDER |
| 1. For removal of the electric motor of the drive of a mirror remove mirror glass, then unscrew screws of fastening and disconnect the multicontact electric socket. |
| 2. Installation is made in the sequence, the return to removal. |
|
MIRROR WITH MANUAL ADJUSTMENT
| PERFORMANCE ORDER |
| 1. Remove the handle of adjustment of provision of a mirror and a decorative overlay of a mirror from the inside of a door. |
|
2. Unscrew three screws (are specified by shooters) and remove a mirror. |
| 3. Installation is made in the sequence, the return to removal. |
|
MIRROR WITH ELECTRIC MANAGEMENT
| PERFORMANCE ORDER |
| 1. Removal of a mirror is made in the same way, as well as hand-operated mirrors, but at the same time instead of removal of the handle of management of a mirror it is necessary to disconnect the electric socket of a mirror. The electric socket is located in a door. |
| 2. Installation is made in the sequence, the return to removal. |
|
