85425ea0




13:15. Replacement of consolidation of the back slightly opened glass

PERFORMANCE ORDER
1. Remove the back slightly opened glass.
2. Cut off old consolidation and rubber fastening from a glass aperture.
3. Clear a glass aperture, but do not delete old glue completely.
4. Clear the surface interfaced to a body, new consolidation by gasoline or other suitable solvent.
5. Apply on a layer of old glue in a glass aperture special polyurethane structure 6 mm thick.
6. Establish new consolidation, then establish glass and you keep it at least 4 hours in a closed position for glue drying.