85425ea0

13:20. Removal and installation of the central console

The central console consists of two parts. A back part is located about the lever of the emergency brake, and the lobby is located under the control panel of a heater.

PERFORMANCE ORDER
1. Removal of the central console needs to be begun with a back part. Using a screw-driver edge as the lever, remove the cap closing the screw.
2. Unscrew the screw (it is specified by an arrow) fastenings of a back part of the central console.
3. Shift a back part of the central console back.
4. Removal of a forward part of the central console can be made without further removal of a back part.
5. For removal of a back part of the central console disconnect from it switches and remove it on the lever of the emergency brake.
6. Separate facing from the gear shifting lever basis, at the same time it is possible not to remove a protective cover of the lever of gear shifting.
7. Unscrew screws (the screw is specified by an arrow) the fastenings of the central console located in a back part of the lever of gear shifting.
8. Unscrew screws (the screw is specified by an arrow) the fastenings of the central console located in a forward part of the lever of gear shifting.
9. On models with the automatic transmission remove a decorative overlay of the lever of the selector.
10. Release two brackets and remove the ashtray located under the control panel of a heater.
11. Unscrew two screws (the screw is specified by an arrow) fixing the central console to the control panel of a heater and remove it.
12. Installation is made in the sequence, the return to removal.