85425ea0




13:10. Doors

Operations on removal of an upholstery of a forward door are stated. The upholstery of a back door is removed similarly, except for noted moments.

PERFORMANCE ORDER
1. On models with a manual window regulator completely close a window and note position of the handle of a window regulator.
2. Release a bracket of fastening and remove the handle.
3. The bracket (it is specified by an arrow) is released if to insert pure fabric between the handle and an upholstery of a door and, stretching fabric opposite to the ends of a bracket, to hook on a bracket and to release it. At the same time it is necessary to pull the handle on himself that she after release of a bracket acted from window regulator shlits.
4. Using a screw-driver edge as the lever, remove decorative finishing of the internal handle of opening of a door.
5. Unscrew the button of blocking of the lock.
6. Using a screw-driver edge as the lever, remove a cap from the screw.
7. Unscrew the screw of fastening of a pocket of a door.
8. Unscrew two screws in the lower part of a pocket and remove a pocket from a door.
9. On back doors remove the ashtray case.
10. Remove a decorative slip from an armrest.
11. Remove an armrest. Fastening of an armrest depends on finishing level, but usually armrests fasten two screws from the forward party. Some armrests also fasten in a back part the ordinary self-cutting screw.
12. On some models the upholstery of a door fastens the self-cutting screws located on upholstery perimeter. Using the screw-driver with a wide edge, separate a door upholstery from a door.
13. If necessary remove a protective film from a door.
14. Installation is made in the sequence, the return to removal.