85425ea0 Removal of pistons and rods

1. Remove a head of the block of cylinders, the oil pallet and the oil pump.
2. New covers of rods are not marked therefore check existence on them of tags and, at their absence, put them, beginning numbering from the drive.
3. Unscrew bolts of fastening of covers of rods and arrange them so that at installation they got up on the places.
4. Uncover rods rods.
5. If necessary take connecting rods from a cover of a rod and a rod. Have inserts so that at installation they rose on the places.
6. Pistons with rods need to be taken through the top part of the engine, pushing out them the hammer handle. If there is a deposit in the top part of the cylinder, remove it with a scraper from soft material. Existence of a step in the top part of the cylinder testifies to excessive wear of the cylinder and need of boring of cylinders of the engine.
7. It is not recommended without need to separate pistons from rods. Because the piston finger is pressed in a rod, its removal and installation requires use of the special equipment.
8. If pistons need to be removed from rods, apply on the tag pistons located from the same party, as a tag on a rod.