4.1.7. Removal and installation of the oil pallet


1. Lift a forward part of the car and fix on supports.
2. Merge engine oil in a suitable container and establish a masloslivny stopper into place.
3. Unscrew bolts, the fixing protective plates of a flywheel, and side clamps and remove a plate.
4. Unscrew bolts and remove the oil pallet. If the pallet sits densely, bring down it the plastic hammer.


1. Clear the oil pallet kerosene or suitable solvent and remove external dirt and internal deposits from the oil pallet. Clear the interfaced surfaces of the oil pallet and the block of cylinders of the engine of the remains of old laying. Check that surfaces were pure and dry. Also clear flutes in covers of bearings.
2. Apply a sealant layer on ledges of a case and in a junction of lobbies and back radical covers of bearings.
3. Establish pith laying on ledges of a case and in flutes of radical covers of bearings.
4. Apply a sealant layer on the laying and a surface interfaced to laying in a junction of a cover of the radical bearing.
5. Install the oil pallet and fix it by bolts, having tightened them gradually and in the diagonal sequence.
6. Establish a protective cover of a flywheel and fix it by bolts. Lower the car on the earth and fill in engine oil in the engine.