- 1. Maintenance instruction
- 2. Weekly checks and service in way
- 3. Maintenance
- 4. Engine
- 4.1. The OHV engine (with the camshaft in the block of cylinders)
- 4.1.1. Technical characteristic
- 4.1.2. Check of a compression
- 4.1.3. The repair operations which are not demanding removal of the engine
- 4.1.4. The repair operations demanding removal of the engine
- 4.1.5. Adjustment of gaps of valves
- 4.1.6. Head of the block of cylinders
- 4.1.7. Removal and installation of the oil pallet
- 4.1.8. Oil pump
- 4.1.9. Gas distribution mechanism asterisks
- 4.1.10. Pistons and rods
- 4.1.11. Removal and installation of a flywheel
- 4.1.12. Removal and installation of support of the power unit
- 4.1.13. Removal and installation of the camshaft and pushers
- 4.1.14. Removal and installation of a back sealing ring of a bent shaft
- 4.1.15. Removal and installation of a bent shaft and radical bearings
- 4.1.16. Check of elements of the engine
- 4.1.17. Engine lubrication system
- 4.1.18. Removal and installation of the engine
- 4.1.19. Start of the engine after capital repairs
- 4.2. OHC engines
- 4.3. The DOHC engine with 16 valves
- 4.4. Diesel engines 16D and 16DA
- 4.5. Diesel engines of 1,7 l
- 4.1. The OHV engine (with the camshaft in the block of cylinders)
- 5. Cooling system, heating and ventilation
- 6. Fuel and exhaust systems
- 7. System of start and charging
- 8. System of ignition
- 9. Coupling
- 10. Transmissions and power shafts
- 11. Brake system
- 12. Suspension bracket and steering
- 13. Body
- 14. Electric circuits
