4.4.18. Removal of the engine with the transmission

Sensor of temperature of cooling liquid

The wire (it is specified by an arrow) the sensor of temperature of cooling liquid is located near a thermostat casing.

1. Remove a weight wire from the accumulator.
2. Remove a cowl.
3. Remove the air filter and an air inlet.
4. Disconnect the electric socket of the switch of a control lamp of pressure of oil, the generator, the sensor of temperature, the electromagnetic valve of system of idling (on the fuel pump), the electric tire of candles of an incandescence, the switch of lamps of a backing (it is specified by an arrow), a radiator fan thermoswitch.
5. Merge cooling liquid.
6. Remove the lower and top hoses of a radiator. Disconnect a hose of a heater and a hose of cooling liquid from a tube of cooling liquid.
7. In engines with the automatic transmission disconnect tubes of a radiator of transmission liquid.
8. It is recommended to remove a radiator and the fan of a radiator not to damage them during removal of the engine.
9. Remove tubes of giving and return of fuel.
10. Disconnect a cable of an accelerator and a cable of system of start of the cold engine from the fuel pump.
11. On models with the mechanical transmission disconnect a coupling cable from the squeezing lever.
12. On models with the mechanical transmission disconnect the gear shifting mechanism.
13. On engines with the automatic transmission disconnect a cable of gear shifting and a cable of compulsory inclusion of a low gear.
14. Disconnect a speedometer drive cable.
15. Disconnect wires from a starter (And – the feeding starter wire, In – a wire of a control system of a starter).
16. Disconnect flexible connection of a reception exhaust pipe.
17. Disconnect an arm and remove a reception exhaust pipe.
18. Disconnect fuel hoses from a cover of a gear belt.
19. Remove the pump of system of the amplifier of steering.
20. Disconnect a tube of the servo-driver of brakes from the vacuum pump.
21. Lift and fix a forward part of the car. Remove forward wheels.
22. Disconnect the lower spherical hinged connections of a forward suspension bracket.
23. Disconnect power shafts from the transmission.
24. Disconnect the grounding tire from a back cover of the transmission (fastening of the tire of grounding is shown by an arrow).
25. Fix the engine on the elevator.
26. Unscrew bolts of an arm of the right support of the engine.
27. Remove arms of other support of the engine and transmission.
28. If necessary remove an oil filter and a pulley of a bent shaft.
29. Lower the engine and the transmission from a motor compartment down.