4.4.10. Removal and installation of the oil pump


1. Remove the oil pallet.
2. Remove an oil filter and disconnect the electric socket from the switch of a control lamp of pressure of oil.
3. Install the piston of the first cylinder in VMT and weaken a tension.
4. Unscrew the central bolt of a pulley of an auxiliary belt and a pulley of a gear belt of a bent shaft. Remove a pulley of an auxiliary belt and a pulley of a gear belt. Remove a segment spline.
5. Remove an intermediate pulley of an auxiliary belt.
6. Remove a back casing of a gear belt.
7. Unscrew bolts of fastening of the oil pump.
8. Remove the oil pump together with a maslozaborny tube. Remove laying and disconnect a maslozaborny tube from the pump.


1. Grease a sealing ring of a bent shaft.
2. Install the oil pump, using new laying. Insert and tighten bolts of fastening of the pump.
3. Establish a maslozaborny tube, using a new sealing ring.
4. Further installation is made in the sequence, the return to removal.