85425ea0




4.4.16.2. Forward sealing ring of a bent shaft

PERFORMANCE ORDER
1. Remove a pulley of an auxiliary driving belt and a pulley of a gear belt from a bent shaft.
2. Drill two small openings located in the opposite ends of a sealing ring in a sealing ring. Screw in two self-cutting screws in the drilled openings of a sealing ring and, using flat-nose pliers, extend a sealing ring for heads of screws (the self-cutting screw is specified by an arrow).
3. Clear a nest for a sealing ring.
4. Dip a new sealing ring into pure engine oil and, using a tubular mandrel of the corresponding diameter, establish a sealing ring in a nest on the required depth. Previously close an adhesive tape an end face of a bent shaft not to damage working edges of a sealing ring at installation.
5. Remove an adhesive tape from a bent shaft.