85425ea0

3.1.3.1.8. Check of level of transmission liquid

AUTOMATIC TRANSMISSION

PERFORMANCE ORDER
1. Install the car on the flat horizontal platform and tighten the emergency brake.
2. If the engine and the transmission cold, you make check of level of liquid within 1 minute after start of the engine.
3. Start the engine in the mode of idling and, having pressed a brake pedal, move the selector lever to all provisions and establish in situation P.
4. During the operation of the engine idling take the probe for measurement of level of oil in the transmission. The probe is located near the probe for measurement of level of engine oil.
5. Wipe the probe and repeatedly establish into place, then take it once again. Oil level on the probe has to be about max tag from the probe with an inscription of +20 °C. The oil level raising from the mark min to the mark max requires 0,4 l of oil.
6. If the transmission was is heated-up up to the normal working temperature the level of oil has to be between the marks min and max from the probe with an inscription of +94 °C. The oil level raising from min tag to a tag of max requires 0,2 l of oil.
7. If oil level low, switch off the engine and add oil through a pipe for the probe.
8. Repeatedly check oil level in the transmission and install the probe into place. Keep in mind that shortage of oil can lead to serious breakages of the transmission.
9. If there is a need to often add oil, then, so leak which needs to be found and eliminated to takes place until it led to serious consequences.