3.1.3.4. Each 60 000 km
Before discharge of transmission liquid allow the transmission to cool down.
| PERFORMANCE ORDER |
| 1. Unscrew all screws of fastening of the pallet of the transmission except for the screw which has to be unscrewed through several turns. |
| 2. Separate the pallet from laying and as the end of the pallet is inclined down, merge liquid in a suitable container. |
| 3. Unscrew the remained screw and remove the pallet. Remove laying of the pallet or remove all traces of sealant. |
| 4. Release the fixing brackets and remove the filter with a sealing ring. Wash out the filter in solvent and dry up it. If the filter is hammered or damaged, replace it. |
| 5. Install the filter with a new sealing ring of round section. |
| 6. Check that the interfaced surfaces of the pallet and a case of the transmission pure and dry. Install the pallet with new laying or with the layer of sealant with a diameter of 5 mm applied on the interfaced surface of the oil pallet. The pallet which has to be installed with laying has intensifying edges, and the pallet installed on sealant has obvious ledges. |
| 7. Fill in the required amount of transmission liquid in the transmission and check level. |
|
