85425ea0

12.2.1. Removal and installation of a rack

Removal

PERFORMANCE ORDER
1. In the presence take off caps of wheels, then weaken bolts of fastening of forward wheels.
2. Tighten the emergency brake, then lift a forward part of the car and fix on supports.
3. Remove the corresponding forward wheel.
4. Take the forelock and unscrew a nut of fastening of a power shaft to a nave. Remove a nut and a washer.
5. Unscrew bolts and remove a support of a forward brake from a rotary fist. Without disconnecting a brake hose from a support, using a soft wire, tie up a support to a body. At the same time do not stretch and do not overwind a brake hose.
6. Unscrew самоконтрящиеся nuts, the fixing pins of the spherical hinge of a tip of steering draft and the lower lever to a rack of a forward suspension bracket. Using a stripper, take a pin of the spherical hinge from a rack of a forward suspension bracket.
7. Take the external end of a power shaft from a nave of a forward wheel. Using a soft wire, tie the end of a power shaft to a body.
8. Unscrew two nuts fixing the top part of a rack of a forward suspension bracket to a body and take a rack of a forward suspension bracket with a rotary fist from under a car wing.

Installation

PERFORMANCE ORDER
1. Install a rack of a forward suspension bracket in the car and screw two самоконтрящиеся nuts of fastening of the top part of a rack, having tightened nuts the required moment.
2. Grease vents of a power shaft and establish a power shaft in a nave of a forward wheel.
3. Establish a washer on a power shaft and screw a koronchaty nut, having tightened it at this stage by hand.
4. Insert a pin of the spherical hinge of the lower lever of a forward suspension bracket into a rotary fist and fix it by a nut, having tightened it the required moment.
5. Establish a pin of the spherical hinge of a tip of steering draft in a rack and fix new самоконтрящейся by a nut, having tightened it the required moment.
6. Using the corresponding tap, clear openings under bolts of fastening of a support.
7. Establish a support and fix it by new bolts. Before a vvinchivaniye of bolts apply the means interfering unscrewing of bolts on a carving of bolts. Tighten bolts the required moment.
8. Tighten the required moment a nut of fastening of a power shaft to a nave.
9. Establish a wheel and lower the car.