| 1. Remove a weight wire from the accumulator. |
| 2. Unscrew screws and remove the lower casing of a steering column. |
| Contact group of the lock of ignition |
| 3. Disconnect contact group from the ignition lock. |
| 4. Unscrew two screws and take contact group of the ignition lock case. |
| 5. Installation is made in the sequence, the return to removal. |
| 6. Check that the central part of contact group was correctly combined with a lock cylinder rod. |
| Lock cylinder |
| 7. Insert a key into the lock of ignition and turn it in situation II. |
|
8. Using a steel core (it is specified by an arrow) with a diameter of 3 mm, inserted through an opening in an ignition lock casing, release a clamp and take the ignition lock cylinder for the ignition key. |
| 9. Before installation of the new cylinder of the lock of ignition insert the ignition key and turn it in situation II. |
| 10. Insert the cylinder into an ignition lock casing before its accurate fixing by a spring then take a key. |
| 11. Connect a weight wire to the accumulator and check operation of the lock of ignition. |
| 12. Establish the lower casing of a steering column. |
