85425ea0




12:15. Removal and installation of a steering wheel

Removal

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Using a screw-driver edge as the lever, remove the button of a sound signal from the central part of a steering wheel and disconnect from it the electric socket.
3. Establish forward wheels of the car for the movement directly forward.
4. The screw-driver unbend uvulas (are specified by shooters) the fixing washer which fixes a nut of a steering wheel from unscrewing.
5. Unscrew a nut of a steering wheel and remove the fixing washer.
6. Apply combination tags on a steering wheel and an end face of a steering shaft.
7. Using a stripper, remove a steering wheel from a steering shaft.
8. If necessary remove a contact ring of a sound signal. Keep in mind that the returnable segment of the index of turns on a ring has to settle down at the left.

Installation

PERFORMANCE ORDER
1. Check that the washer and a spring are on the helmsman to a shaft.
2. Combine adjusting tags and establish by easy blows of a kiyanka a steering wheel on a steering shaft.
3. Check centering of a steering wheel.
4. Establish the fixing washer and screw a nut of fastening of a steering wheel and tighten it the required moment.
5. For fixing of a nut from unscrewing bend uvulas of the fixing washer.
6. Connect the electric socket and install the button of a sound signal.
7. Connect a weight wire to the accumulator.