- 1. Maintenance instruction
- 2. Weekly checks and service in way
- 3. Maintenance
- 4. Engine
- 4.1. The OHV engine (with the camshaft in the block of cylinders)
- 4.2. OHC engines
- 4.2.1. Technical characteristic
- 4.2.2. Check of a compression
- 4.2.3. The repair operations demanding removal of the engine
- 4.2.3.1. Recommendations about removal of the engine
- 4.2.4. Removal and installation of auxiliary elements of the engine
- 4.2.5. Removal and installation of the valve of adjustment of pressure of oil
- 4.2.6. Gear belt
- 4.2.7. Head of the block of cylinders
- 4.2.8. Removal and installation of the camshaft
- 4.2.9. Removal and installation of the oil pallet
- 4.2.10. Oil pump
- 4.2.11. Removal and installation of pistons and rods
- 4.2.12. Removal and installation of a flywheel
- 4.2.13. Removal and installation of a forward sealing ring of a bent shaft
- 4.2.14. Removal and installation of support of the power unit
- 4.2.15. Replacement of a back sealing ring of a bent shaft
- 4.2.16. Bent shaft and radical bearings
- 4.2.17. Check of details of the engine
- 4.2.18. Lubrication system and system of ventilation of a case
- 4.2.19. Removal and installation of the engine
- 4.2.20. Start of the engine after capital repairs
- 4.3. The DOHC engine with 16 valves
- 4.4. Diesel engines 16D and 16DA
- 4.5. Diesel engines of 1,7 l
- 5. Cooling system, heating and ventilation
- 6. Fuel and exhaust systems
- 7. System of start and charging
- 8. System of ignition
- 9. Coupling
- 10. Transmissions and power shafts
- 11. Brake system
- 12. Suspension bracket and steering
- 13. Body
- 14. Electric circuits
