| 1. Open a cowl and enclose pure rags under cowl corners to protect a paint and varnish covering of the car at removal of a cowl. |
| 2. In the presence of illumination of a motor compartment disconnect the electric socket from a bulb. |
| 3. Using a marker, note position of hinges on a cowl. |
|
4. Ask the assistant to support a cowl, then unscrew bolts of fastening of the left and right hinges of a cowl. |
| 5. Being careful, remove a cowl. |
| 6. If the new cowl is established, rearrange on it all removable details. |
| 7. Installation is made in the sequence, the return to removal. |
|
8. If the cowl lock probe was removed, adjust its length and tighten a lock-nut (1 – the probe, 2 – a washer, 3 – a spring, 4 – a lock-nut, X = 40–45 mm). |
| 9. Close a cowl and check its arrangement of rather adjacent surfaces. |
| 10. Adjust the provision of a cowl so that at the closed cowl the gap on perimeter of a cowl was identical from all directions. |
| 11. For adjustment weaken bolts of fastening of hinges of a cowl and, moving a cowl, adjust its situation. |
| 12. For adjustment of a forward part of a cowl on height it is necessary to screw in or unscrew rubber pillows. |
