| Hatchback and Sedan models |
| 1. Remove liquid from the main brake cylinder. |
| 2. Install the corresponding container under the main brake cylinder that when unscrewing valves to collect the flowed-out brake fluid. |
| 3. Mark brake tubes, then unscrew connecting nuts and disconnect brake tubes from valves of adjustment of pressure. |
| 4. Close the ends of tubes suitable traffic jams. |
| 5. Unscrew valves of adjustment of pressure from the main brake cylinder and close openings of the main brake cylinder suitable traffic jams. |
| Station wagon and Van models |
| 6. For reduction of losses of brake fluid uncover a popolnitelny tank of the brake system, close a tank mouth polyethylene and again screw a cover. It is necessary in order that the cover hermetically closed a popolnitelny tank. |
| 7. Lift a back part of the car and fix on supports. |
|
8. Weaken an arm of a spring of the valve of adjustment of pressure, move an arm back and disconnect from it a spring. |
| 9. Clear area about connection of pipelines to valves of adjustment of pressure. |
| 10. Mark and disconnect pipelines from the valve of adjustment of pressure. |
| 11. Close the ends of tubes suitable traffic jams. |
| 12. Unscrew bolts and remove the valve of adjustment of pressure. |
