11:17. Removal and installation of a pedal of a brake


1. Disconnect the electric socket from the switch of stoplights (it is specified by an arrow), then turn the switch on 90 ° and remove it from an arm.
2. Disconnect a returnable spring from a brake pedal.
3. Remove a spring bracket and take the hinged finger fixing a fork of a rod of the vacuum amplifier of brakes to a brake pedal.
4. Remove the forelock fixing a brake pedal shaft nut.
5. Unscrew a nut from a shaft of a pedal of a brake and take a shaft to a steering column.
6. Remove a brake pedal.


1. Installation is made in the sequence, the return to removal.
2. At installation use the new forelock.
3. Grease all points of turns.
4. Before installation of the switch of stoplights as far as possible, extend a switch rod (above). After installation there will be a self-regulation of the switch of a stoplight (below).