85425ea0




11:18. Removal and installation of a cable of the emergency brake

Removal

PERFORMANCE ORDER
1. Unscrew an adjusting nut of the compensator of cables of the emergency brake and remove the compensator.
2. On models with back drum brakes remove brake drums.
3. Release a cable of the emergency brake from fastenings under the car bottom, the fuel tank and a back beam.
4. Disconnect cables of the emergency brake from control levers of the emergency brake. On models with back drum brakes levers are located on the leading brake shoes, and on models with back disk brakes levers are located in a back part of a brake board.
5. By means of the screw-driver remove a lock ring and take plastic plugs from brake boards.
6. Take a cable from brake boards and remove it.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal.
2. Keep in mind that the cover of a cable of dark color is established in the top part of the compensator.
3. Adjust the emergency brake.