85425ea0

11.12.1. Removal of the cylinder

PERFORMANCE ORDER
1. In the presence take off a wheel cap, then weaken bolts of fastening of a back wheel.
2. Lift a back part of the car and record on supports.
3. Remove a back wheel.
4. Release the emergency brake.
5. Unscrew the screw of fastening of the brake drum and remove the brake drum.
6. If the brake drum is kept by brake shoes, remove a cap from an opening in a brake board and, using the screw-driver, move a control lever of the emergency brake to a brake shoe in order that brake shoes departed from a drum.
7. If necessary weaken a tension of a cable of the emergency brake.
8. Note an arrangement and, using flat-nose pliers, remove the top returnable spring squeezing brake shoes.
9. Remove the top ends of brake shoes from pistons of the working brake cylinder.
10. For reduction of losses of brake fluid uncover a popolnitelny tank of the brake system.
11. Close a tank mouth polyethylene and again screw a cover. It is necessary in order that the cover hermetically closed a popolnitelny tank.
11. Remove dirt around the place of connection of a brake tube to a back part of the working brake cylinder.
12. Unscrew a connecting nut.
13. Being careful, take a brake tube from the working brake cylinder and close it a stopper.
14. Unscrew two bolts of fastening of the working brake cylinder to a brake board and, being careful, remove the working brake cylinder.