85425ea0




11.10.3. Installation of a support

PERFORMANCE ORDER
1. On supports of GMF and early modifications of a support of ATE clear a carving of bolts of fastening of a support and an opening for bolts on a rotary fist.
2. Apply a thin film of the means interfering unscrewing of bolts on a carving of bolts.
3. Establish a support and fix by bolts, having tightened them the required moment.
4. Establish brake shoes.
5. Connect a brake hose to a support and fix it by a connecting bolt with new sealing washers.
6. Remove a clip from a brake hose or polyethylene from a popolnitelny tank and pump over the corresponding brake contour.
7. Establish a wheel and lower the car on the earth.
8. Tighten bolts of fastening of a wheel the required moment.