85425ea0




1.10.23.2. Control panel

  

At inclusion of ignition all lamps of control check light up. If all controlled functions as it should be, lamps approximately in 4 seconds die away.

Indication of brake fires dies away when after use of brakes control check checks their working capacity.

Control check exercises control of level of liquids, thickness of brake overlays of forward disk brakes, and also headlights of external light, including wires and safety locks. When checking headlights malfunction is registered only in case of inclusion of the corresponding chain.

The corresponding indication of malfunction lights up in case:

– one of lamps of passing or tail light fused;
– one of stoplight lamps fused (as well on the trailer if the manufacturer provided the device for the trailer);
– too low level of cooling liquid in a broad tank;
– too low level of engine oil at inclusion of ignition or after the previous trip;
– too low level of brake fluid;
– brake overlays of forward disk brakes communicated to the minimum thickness;
– too low level of liquid in a washer of glasses.

Determination of level of oil is made after inclusion of ignition. If the level of oil is normal, the control lamp dies away.

Repeated measurement of level of oil happens if after switching off and inclusion of ignition there passed at least 4 minutes necessary for running off of oil in the oil pallet.

If the level of oil is lower than norm, the control lamp does not die away and burns before switching off of ignition. Repeated measurement of level of oil happens if after switching off and inclusion of ignition there passed at least 30 seconds.

If the car costs on a bias in 15% or is inclined to the right for 10%, the control lamp will burn even at normal amount of oil.

If the control lamp blinks, then damage of an oil pipeline is possible. Check oil level. Address on service station.