85425ea0




1.19. Heating and ventilation

In the car the combined system of heating and ventilation is used. Due to mixing of cold and warm air adjustment of temperature is carried out without delay and at all speeds is kept by a constant.

The size of a stream of air is regulated by the fan.

External air is sucked in before a windshield, if necessary is warmed up and goes to interior of the car.
Removal of air is carried out or via side gates, or through back doors, or through plastic inserts which are closed by a back door (Van).

For heating of legs of back passengers the warmed-up air on channels under a carpet moves in a back part of salon.

Management of a heater

Left lever
Heating
Up
More warmly
Down
More cold

Constantly you hold opened air supply and only temporarily close it (smoke, unpleasant smells, etc.) for what move the lever of distribution of a stream of air to the middle and close all nozzles of ventilation.

Right lever
Air distribution
Up
For defrosting
Down
For the top space
Lower lever
Air distribution
Up
For the top space
Down
For legs, forward and back space

FAN

The stream of air can be increased by means of the fan if it is necessary for increase in comfort or acceleration of defrosting.

The arrow specified 3 steps of the fan.

AVERAGE NOZZLES OF VENTILATION

Turn snuffled ventilation it is possible to change the direction of a stream of air. Nozzles open a wheel with a nakatka.

At installation snuffled in the situation specified in the drawing the narrow stream of air on the back passenger moves, at the same time influencing comfort of the driver and forward passenger.

SIDE NOZZLES OF VENTILATION

According to position of the left lever from snuffled the cold or warmed-up air moves. Nozzles open a wheel with a nakatka. In the fixed situation About nozzles are closed.

The stream of air can be increased by means of the fan.

Adjustment of a stream of air is carried out by turn and an inclination of plates snuffled.

The most comfortable situation – when the stream of warm air is sent to cold season along doors.

SIDE DISK NOZZLES

If the top lever of distribution of air is moved up, then cold or warm air will move to a windshield and side glasses (mainly in a zone of external mirrors).

SUMMER VENTILATION

For the maximum ventilation of the top part of salon completely open nozzles. Move the lever of distribution of air to the middle.

For air supply move the lever of distribution of air to legs down.

Move the lever of temperature down.

HEATING

Through nozzles to a windshield.

To legs.

Through side nozzles of ventilation.

The combined air supply is possible.

The stream of air can be increased by means of the fan.

Efficiency of heating depends on temperature of cooling liquid therefore heating is used only at the engine which is warmed up up to the normal working temperature.

Heating of legs

PERFORMANCE ORDER
1. For air supply move the lever of distribution of air to legs down. Move the lever of temperature up.
2. Increase an air stream by means of the fan, having established it on the second step. Close the central nozzles of system of ventilation.

Removal of moisture and defrosting of glasses

PERFORMANCE ORDER
1. Move all levers of the control panel of a heater up and turn on the heater fan.
2. Side nozzles can be open and directed to side glasses.
3. Close the central nozzles.
4. Include a heater of back glass.

THE WARMED BACK GLASS

The heater of back glass works only at the working engine.

To switch off immediately as soon as the review is free. Avoid unnecessary overloads of electric system.

When cleaning an internal surface of back glass do not damage heater conductors.

SITTING LOBBIES WITH THE ELECTRICAL HEATING

Push-button switch on the right.

The top switch – sitting of the driver.

The lower switch – sitting of the forward passenger.