11.11.3. Installation of a support

1. Clear a carving of bolts of fastening of a support and an opening for bolts in the nave fastener.
2. Apply the means interfering unscrewing of bolts on a carving of bolts.
3. Establish a support and fix it by bolts, having tightened them the required moment.
4. Connect a brake tube to a support and fix it by a connecting nut.
5. Establish brake shoes.
6. Remove polyethylene from a jellied mouth of a popolnitelny tank of the brake system and pump over the corresponding contour.
7. Establish a wheel and lower the car.
8. Tighten bolts of fastening of a wheel.