- 1. Maintenance instruction
- 2. Weekly checks and service in way
- 3. Maintenance
- 4. Engine
- 4.1. The OHV engine (with the camshaft in the block of cylinders)
- 4.2. OHC engines
- 4.3. The DOHC engine with 16 valves
- 4.3.1. Technical characteristic
- 4.3.2. Check of a compression
- 4.3.3. The operations demanding removal of the engine
- 4.3.4. Removal of auxiliary components of the engine
- 4.3.5. Removal and installation of the valve of adjustment of pressure of oil
- 4.3.6. Gear belt
- 4.3.7. Removal and installation of the mechanism of a tension of a gear belt and rollers
- 4.3.8. Removal, check and installation of camshafts
- 4.3.9. Head of the block of cylinders
- 4.3.10. Removal and installation of the oil pallet and maslootrazhatelny plate
- 4.3.11. Oil pump
- 4.3.12. Removal and installation of the valve of the thermostat of the oil heater
- 4.3.13. Pistons and rods
- 4.3.14. Removal and installation of a flywheel
- 4.3.15. Replacement of sealing rings
- 4.3.16. Removal, check and installation of bearings of a bent shaft
- 4.3.17. Check of components of the engine
- 4.3.18. Removal and installation of the engine
- 4.3.19. Start of the engine after capital repairs
- 4.4. Diesel engines 16D and 16DA
- 4.5. Diesel engines of 1,7 l
- 5. Cooling system, heating and ventilation
- 6. Fuel and exhaust systems
- 7. System of start and charging
- 8. System of ignition
- 9. Coupling
- 10. Transmissions and power shafts
- 11. Brake system
- 12. Suspension bracket and steering
- 13. Body
- 14. Electric circuits
