85425ea0

10.1.6. Replacement of sealing rings

SEALING RING OF THE POWER SHAFT

PERFORMANCE ORDER
1. Install a suitable container under the transmission.
2. Take the internal end of a power shaft from the transmission (see subsection 10.3.2). Do not unscrew a nut of fastening of a power shaft to a nave.
3. Using a soft wire, tie the internal end of a power shaft to a body.
4. Using a screw-driver edge as the lever, take a sealing ring from the transmission.
5. Clear a nest of a sealing ring.
6. Apply a thin film of lubricant on an external surface of a sealing ring.
7. Using a tubular mandrel of the corresponding diameter, install a sealing ring in the transmission.
8. Establish a power shaft.
9. Check oil level in the transmission and, if necessary, bring it to norm.

SEALING RING OF THE ENTRANCE SHAFT OF THE TRANSMISSION

See subsection 9.4.1 and subsection 9.4.3.