10.1.4. Removal and installation of a cable of blocking of turning on of the reverse gear
The mechanism of blocking prevents casual turning on of the reverse gear. Blocking is released after a raising of the handle located under the gear shifting lever handle. The top part of a cable is attached to the handle, and lower it is attached to the blocking draft.
| PERFORMANCE ORDER |
| 1. At a rupture of a cable replace it as follows, but previously check that there are spare parts. |
| 2. Remove the gear shifting lever. |
| 3. Remove from the gear shifting lever the handle, previously its heating in hot water. Even at removal of the heated handle it can break. |
| 4. Take the spring located under the handle. |
|
5. Unscrew the screw from the top part of the lever of gear shifting. |
|
6. Beat out cylindrical pins, the fixing plastic couplings and the flood lever to the gear shifting lever basis. It is probable that at removal the plastic coupling will be damaged. |
| 7. Remove a cable and a tip of a cable. |
| 8. Installation is made in the sequence, the return to removal. |
|
