10.1.7. Check, removal and installation of the switch of lamps of a backing

Lamps of a backing join the switch of plunger type which is screwed in in the top part of a case of the transmission.


1. If backing lamps do not work, first of all check the fuse of an electric chain.
2. Disconnect the electric socket from the switch and, using an ohmmeter, check that contacts of the switch become isolated at inclusion of transfer of a backing.
3. Otherwise the switch is faulty and it needs to be replaced.

Removal and installation

1. For improvement of access to the switch remove the accumulator.
2. Disconnect the electric socket from the switch and unscrew the switch from a case of the transmission and remove it together with consolidation.
3. Installation is made in the sequence, the return to removal.
4. At the same time it is necessary to establish new consolidation of the switch.