4.5.23. Installation of the engine
Correct arrangement of the hydrotransformer| And = 9–10 mm |
Installation is carried out to the sequences, the return to removal.
- 1. Maintenance instruction
- 2. Weekly checks and service in way
- 3. Maintenance
- 4. Engine
- 4.1. The OHV engine (with the camshaft in the block of cylinders)
- 4.2. OHC engines
- 4.3. The DOHC engine with 16 valves
- 4.4. Diesel engines 16D and 16DA
- 4.5. Diesel engines of 1,7 l
- 4.5.1. Technical characteristic
- 4.5.2. Method of removal of the engine
- 4.5.3. Repair of the engine
- 4.5.4. Replacement of engine oil and oil filter
- 4.5.5. Check, removal, installation and adjustment of a gear belt
- 4.5.6. Check and adjustment of gas distribution
- 4.5.7. Removal and installation of a head of the block of cylinders
- 4.5.8. Removal and installation of the camshaft
- 4.5.9. Removal and installation of the oil pallet
- 4.5.10. Removal and installation of the oil pump
- 4.5.11. Removal and installation of the perepuskny valve
- 4.5.12. Removal and installation of the water pump
- 4.5.13. Removal, check and installation of the thermostat
- 4.5.14. Removal and installation of pistons and rods
- 4.5.15. Removal and installation of a flywheel
- 4.5.16. Replacement of sealing rings
- 4.5.17. Replacement of support of the power unit
- 4.5.18. Removal of the engine
- 4.5.19. Repair of the engine
- 4.5.20. Removal, repair and assembly of the oil pump
- 4.5.21. Head of the block of cylinders
- 4.5.22. Check of elements of the engine
- 4.5.23. Installation of the engine
- 5. Cooling system, heating and ventilation
- 6. Fuel and exhaust systems
- 7. System of start and charging
- 8. System of ignition
- 9. Coupling
- 10. Transmissions and power shafts
- 11. Brake system
- 12. Suspension bracket and steering
- 13. Body
- 14. Electric circuits
