4.5.17. Replacement of support of the power unit
Fastenings of the engine
1 – right forward support,
2 – arm of the right forward support,
3 – back support,
4 – arm of a back support,
|
5 – left forward support,
6 – arm of the left forward support,
7 – an arm of the right forward support (engines with the amplifier of steering) |
If shock-absorbers of support of the engine are worn-out or damaged, they need to be replaced.
Lift and fix a forward part of the car. Fix the engine on the elevator or on the jack established under the engine.
| PERFORMANCE ORDER |
| Right forward support |
|
1. Unscrew three bolts fixing a support arm to the block of cylinders and two bolts fixing a support to a body (are specified by shooters). Remove fastening entirely and disconnect a support from an arm. |
| 2. Installation is made in the sequence, the return to removal. |
| Left forward support |
|
3. Unscrew two bolts (are specified by shooters) fixing a support to a transmission arm and two bolts (are specified by shooters) fixing a support to a body. Remove a support. |
| 4. Installation is made in the sequence, the return to removal. |
| Back support |
|
5. Unscrew two bolts fixing a support to an arm of the transmission (A), and unscrew two nuts fixing a support to a cross-piece (In). Remove a support. |
| 6. Installation is made in the sequence, the return to removal. |
|
