4.5.19. Repair of the engine

1. Remove the following elements from the engine:
      – head of cylinders;
      – the oil pallet (whenever possible try not to overturn the engine);
      – oil pump;
      – pistons and rods;
      – flywheel and plate of the drive.
2. Turn the engine.
3. Check that covers of radical bearings were numbered from 1 to 4, since the party of a pulley of a bent shaft. The fifth cover is not numbered, but it differs from the others. Number covers if they are not numbered.
4. Unscrew bolts of covers of radical bearings and uncover.
5. Remove a bent shaft.
6. Remove the top inserts of radical bearings.