| 1. Remove a weight wire from the accumulator. |
| 2. Remove the air filter. |
| 3. Disconnect the grounding tire from a face cover of the transmission. |
| 4. Disconnect a cable of compulsory inclusion of a low gear from the carburetor, then unscrew the bolts fixing a cable to the transmission. |
| 5. Remove a cable of the choice of transfers from the lever on the transmission, then unscrew bolts of fastening of an arm of a cable. It is not required to remove a cable from an arm. |
| 6. Disconnect a speedometer drive cable from the transmission. |
| 7. Unscrew three top bolts fixing the transmission to the engine. Keep in mind that the central bolt also fixes the arm supporting a cooling system tube. |
| 8. Weaken bolts of fastening of forward wheels, then lift a forward part of the car and fix on supports. |
| 9. Remove forward wheels. |
| 10. Using the load-lifting mechanism, support the engine. |
| 11. Disconnect spherical hinges of the lower levers of a forward suspension bracket. |
| 12. Disconnect power shafts from the transmission. |
| 13. Using a soft wire, tie the internal ends of power shafts to a body. |
| 14. Close openings in the transmission suitable traffic jams. |
| 15. Disconnect from the transmission hoses of supply of transmission liquid to a radiator. |
| 16. Unscrew the bolts fixing a protective plate of the transmission then note mutual position of the hydrotransformer and a plate of the drive. |
| 17. A wrench for a bolt of fastening of a pulley of a bent shaft turn a bent shaft of the engine in such situation that one of bolts of fastening of the hydrotransformer was available. |
| 18. The screw-driver or mount for teeths of a gear wreath record a drive plate from a provorachivaniye and unscrew a bolt of fastening of the hydrotransformer. |
| 19. Turn a bent shaft of the engine and similarly unscrew the remained bolts. |
| 20. Unscrew the remained bolts of fastening of the transmission to the engine. |
| 21. Unscrew bolts of fastening of a back support of the power unit to a body. |
| 22. Unscrew bolts of fastening of an arm of support of the exhaust system. |
| 23. Support by a jack through wooden whetstone the transmission. |
| 24. Remove the left support of the power unit. |
| 25. Unscrew two bolts fixing the transmission to an engine arm. |
| 26. Take away the transmission from the engine, then lower and take it from under the car. |
| 27. If removal of the transmission is interfered by a tube for the probe of measurement of level of oil, remove it. |
| 28. If the transmission is subject to replacement, rearrange a support of the power unit and connecting couplings of the oil heater on the new transmission. |
