5.9.3. Removal and installation of a radiator of a heater

1. Remove forward section of the central console.
2. Disconnect a cable of management from the case of distribution of air and remove the control unit of a heater.
3. About a partition of a motor compartment press hoses of supply of cooling liquid to a heater and disconnect them.
4. Unscrew 4 screws fixing an air distributor case cover (in the drawing unscrewing of the top screw of fastening is shown at the left). For access to the lower screws (the lower screw is shown by an arrow in the drawing on the right) it is necessary to turn off a carpet.
5. Disconnect back air ducts of heating and uncover the air distributor.
6. Unscrew three screws fixing a heater radiator.
7. For access to the top screws it is necessary to move a folding shutter. The arrangement of the top screws of fastening of the fan of a heater is specified by shooters.
8. Remove a heater radiator.
9. Installation is made in the sequence, the return to removal. Check the level of cooling liquid and, if necessary, bring it to norm.