7.9.6. Removal and installation of the switch of a control bulb of pressure of oil
Switch arrangement| The switch of a control bulb of pressure of oil is installed on a reverse side of the oil pump. |
| PERFORMANCE ORDER | |||
|
- 1. Maintenance instruction
- 2. Weekly checks and service in way
- 3. Maintenance
- 4. Engine
- 5. Cooling system, heating and ventilation
- 6. Fuel and exhaust systems
- 7. System of start and charging
- 7.1. Technical characteristic
- 7.2. Finding of malfunctions in electric chains
- 7.3. Accumulator
- 7.4. Generator
- 7.5. Starter
- 7.6. Replacement of the lock of ignition
- 7.7. Removal and installation of the sensor of pressure of oil
- 7.8. Removal and installation of the sensor of level of oil on models with 16 valves
- 7.9. Electric equipment of diesel engines 16D, 16DA, 17D and 17DR
- 7.9.1. Technical characteristic
- 7.9.2. Removal and installation of the accumulator
- 7.9.3. Starter
- 7.9.4. Check of system of preliminary heating
- 7.9.5. Replacement of candles of an incandescence
- 7.9.6. Removal and installation of the switch of a control bulb of pressure of oil
- 7.9.7. Check, removal and installation of the thermal sensor of the fan of a radiator
- 7.9.8. Check of the fan of a radiator
- 7.9.9. Removal and installation of the sensor of temperature of cooling liquid
- 8. System of ignition
- 9. Coupling
- 10. Transmissions and power shafts
- 11. Brake system
- 12. Suspension bracket and steering
- 13. Body
- 14. Electric circuits
