85425ea0




7.7. Removal and installation of the sensor of pressure of oil

The sensor of pressure of oil is screwed in in the block of cylinders or the fastener of an oil filter.

Removal

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator and disconnect wires (are specified by shooters) from the sensor.
2. Unscrew the sensor and remove a sealing ring. If the sensor is removed for a long time, close a suitable stopper an opening for the sensor.

Installation

PERFORMANCE ORDER
1. Check a condition of a sealing ring and, if necessary, replace it.
2. Screw in the sensor together with a sealing ring and tighten it the required moment. Connect electric wires to the sensor.
3. Check the level of engine oil and, if necessary, bring it to norm.