7.4.2. Removal and installation of the generator


1. Remove a weight wire from the accumulator.
2. Mark and disconnect electric wires from a back part of the generator.
3. Unscrew a bolt of adjustment of a tension of a driving belt of the generator. At the same time note an arrangement of the tire of grounding of the generator. Weaken a hinged bolt of fastening of the generator and, having turned the generator to the engine, take off a driving belt.
4. Unscrew a hinged bolt and remove the generator from the engine. On some cars the hinged bolt is established in such a way that it cannot be taken completely for removal of the generator. In this case it is necessary to unscrew bolts, the fixing generator arms.
5. Be careful not to strike the generator.


Installation is made in the sequence, the return to removal. Adjust a tension of a driving belt of the generator.