85425ea0




12.4. Lower lever of a forward suspension bracket

Removal

PERFORMANCE ORDER
1. In the presence take off a wheel cap, then weaken bolts of fastening of a wheel.
2. Tighten the emergency brake, then lift a forward part of the car and fix on supports.
3. Remove the corresponding wheel.
4. Unscrew the nut fixing the end of the stabilizer of cross resistance to the lower lever.
5. Take the forelock and unscrew a koronchaty nut (it is specified by an arrow) the spherical hinge connecting the lower lever of a forward suspension bracket from a resistant forward suspension bracket.
6. Using a stripper of spherical hinges, take a pin of the spherical hinge from a rotary fist.
7. Unscrew the hinged bolts and bolts (are specified by shooters) fixing a clip of the lower lever of a forward suspension bracket and remove the lever.

Installation

PERFORMANCE ORDER
1. Using the corresponding tap, clear a carving in openings under bolts of fastening of a clip of the lower lever.
2. Install the lower lever of a forward suspension bracket on the car and fix by bolts, having tightened them at this stage by hand. The head of a hinged bolt has to settle down from the forward party of the car.
3. Screw on a hinged bolt new самоконтрящуюся a nut.
4. Before a vvinchivaniye of a bolt of fastening of a clip of the lower lever apply the means interfering their unscrewing on a carving of bolts.
5. Support the lower lever of a forward suspension bracket by a jack in horizontal position and tighten all bolts of fastening of the lower lever the required moment.
6. Lower a jack.
7. Establish a pin of the spherical hinge of the lower lever in a rotary fist and fix by a nut, having tightened it the required moment. Using the new forelock, record a nut from unscrewing.
8. Connect the stabilizer of cross stability to the lower lever.
9. Establish a wheel and lower the car. Tighten bolts of fastening of a wheel and, in the presence, establish a wheel cap.
10. Check and, if necessary, adjust the angles of installation of forward wheels.