85425ea0




5.9. Elements of system of heating

Heater elements
1 – dashboard,
2 – partition,
3 – heater fan engine,
4 – central air duct,
5 – casing of the central air duct,
6 – ventilation nozzles,
7 – control unit of a heater,
8 – side nozzles,
9 – casing of a side nozzle,
10 – casing of a side nozzle,
11 – side air ducts,
12 – windshield air ducts,
13 – top part of the case of the distributor of air,
14 – lower part of the case of the distributor of a stream of air,
15 – heater radiator,
16 – air distributor cover,
17 – cable of management of air temperature,
18 – top cable of the distributor of air,
19 – lower cable of the distributor of air,
20 – folding shutter of mixing of air,
21 – top shutter of the distributor of air,
22 – lower shutter of the distributor of air

PERFORMANCE ORDER
1. Remove forward section of the central console.
2. Remove the radio receiver. In the absence of the radio receiver remove a decorative cap.
3. Note an arrangement and disconnect three cables from the air distributor case. Keep in mind that cables have color marking:
      – a brown cable – for air supply in legs;
      – a white cable – for adjustment of temperature of the air coming to salon;
      – a black cable – for air supply in the top part of salon.
4. Unscrew two screws from the top part (the drawing at the left) and two screws from lateral faces of decorative finishing of the radio receiver (the drawing on the right).
5. Having pulled on itself, remove the control panel of a heater. For full removal of the control panel of a heater disconnect electric sockets from the switch of the fan of a heater and the lighter.
6. Installation is made in the sequence, the return to removal.