| 1. In the presence take off a wheel cap, then weaken bolts of fastening of a back wheel. |
| 2. Lift a back part of the car and record on supports. |
| 3. Remove a back wheel. |
| 4. Release the emergency brake. |
| 5. Unscrew the screw of fastening of the brake drum and remove the brake drum. |
| 6. If the brake drum is kept by brake shoes, remove a cap from an opening in a brake board and, using the screw-driver, move a control lever of the emergency brake to a brake shoe in order that brake shoes departed from a drum. |
| 7. If necessary weaken a tension of a cable of the emergency brake. |
| 8. Note an arrangement and, using flat-nose pliers, remove the top returnable spring squeezing brake shoes. |
| 9. Remove the top ends of brake shoes from pistons of the working brake cylinder. |
| 10. For reduction of losses of brake fluid uncover a popolnitelny tank of the brake system. |
| 11. Close a tank mouth polyethylene and again screw a cover. It is necessary in order that the cover hermetically closed a popolnitelny tank. |
| 11. Remove dirt around the place of connection of a brake tube to a back part of the working brake cylinder. |
| 12. Unscrew a connecting nut. |
| 13. Being careful, take a brake tube from the working brake cylinder and close it a stopper. |
| 14. Unscrew two bolts of fastening of the working brake cylinder to a brake board and, being careful, remove the working brake cylinder. |
